Power & Propulsion – Page 61

  • A Voith Inline Thruster combines motor and propeller into a powerful unit.
    News

    Voith scales thrusters up for wind farm construction vessels

    2010-10-02T10:48:00Z

    A 131m long and 39m wide jack-up vessel now under build for the erection of offshore wind turbines is being fitted with the currently most powerful Inline Thruster from Voith Turbo Advanced Propeller Technologies.

  • ’Falcon Spirit’ was a much visited vessel when alongside for Seawork 2010.
    News

    Optimised propulsion for Seawork exhibition boat

    2010-07-26T15:25:00Z

    Bedfordshire UK based Clements Marine has supplied propellers and stern gear to Alnmaritec’s latest research vessel ‘Falcon Spirit’ which was built for Plymouth University and recently attracted a lot of interest at the Seawork Exhibition in Southampton.

  • Harwich Haven’s new pilot boat is predicted to save £48,500 in fuel costs per year.
    News

    Propulsion and hull package nets savings for HHA

    2010-07-26T14:57:00Z

    This summer has seen the launch of Holyhead Marine’s first ever pilot boat, which the North Wales based yard has built for Harwich Haven Authority (HHA).

  • The Centadisc-C carbon fibre shaft bridges spans of any length without the need for intermediate support bearings.
    News

    ‘Bute’ ferry benefits from long shaft solution

    2010-07-22T10:39:00Z

    Over the last 10 years, power transmissions specialists Centa Transmissions has been a leading innovator in the development of lightweight composite driveshafts.

  • Parker Racor’s DFBO fuel filtration system.
    News

    Filtration impoves engine efficiency to cut costs

    2010-07-21T14:06:00Z

    In an increasingly competitive global market, vessel owners and managers are under growing pressure both to protect operating margins through cost efficiencies and to comply with ever tougher environmental legislation.

  • Inchcape 23 is designed for use in Dubai to ferry crew and equipment quickly and safely around the Gulf.
    News

    Propulsion solutions from Dubai to Norway

    2010-07-21T13:54:00Z

    Bedford UK based Clements Marine recently completed a contract to supply the newbuild 22.5m monohull crew and workboat built by Lyme Boats for Inchcape Shipping Services.

  • Engines Plus Ltd was showing the UK line-up of marine propulsion engines and gensets at Seawork 2010.
    News

    Spanish Sole finds a UK market

    2010-07-21T10:09:00Z

    Barcelona based engine manufacturer Sole SA is well recognised in Europe for a range of small, mostly leisure orientated marine diesels but had no presence in the UK before launching a venture with Gloucester based Engines Plus Ltd at Seawork 2010.

  • The IMO II compliant M 20 C engine will produce between 1,020 and1,520 kW at 900 to 1,000 rpm and is capable of operating on Heavy Fuel Oil (HFO) or Marine Diesel Oil (MDO).
    News

    Early delivery for IMO II compliant MaK M 20 C

    2010-07-20T21:56:00Z

    With the implementation of IMO II regulations for the marine industry on 1 January 2011, marine engine manufacturers are finalizing strategies and development for modifications on engines to meet the strict requirements.

  • The new wind turbine installation vessel, owned by Fred. Olsen Windcarrier AS, will be powered by an integrated Wärtsilä ship power system.
    News

    Wärtsilä power system for wind turbine installation vessel

    2010-07-20T21:04:00Z

    Ship power systems integrator Wärtsilä, has signed a contract with Lamprell plc of the United Arab Emirates (UAE) to supply a complete ship power system for a new wind turbine installation vessel (WTIV).

  • The new HamiltonJet HT810 features one piece casting of impellers, highly efficient narrow reverse duct designs, new anode positioning and improved aluminium casting systems.
    News

    Water jet development goes with the flow

    2010-07-19T09:33:00Z

    New Zealand based water jet manufacturer HamiltonJet has completed assembly of the second model in its new HT series, the HT810.

  • The system has been extensively tested in Sweden onboard the passenger ferry Sandhamn.
    News

    SCR technology for Volvo Penta engines

    2010-07-04T20:55:00Z

    Volvo Penta, together with specialist company STT Emtec, is introducing an effective solution to reduce NOx emissions from high speed marine diesel engines.

  • To volunteer your specialist services to the Jubilee Sailing Trust, as did the team from the Cummins UK Marine Centre, contact the charity on 023 8044 3113 or email operations@jst.org.uk.
    News

    Cummins repowers the Lord Nelson

    2010-07-04T20:28:00Z

    Cummins UK continues to build upon its successful ten year relationship with the Jubilee Sailing Trust (JST), a registered charity that owns and operates the only two tall ships in the world designed to enable people of all physical abilities to sail side by side as equals in a demanding ...

  • The ‘LK Mitchell’ has benefitted from recent upgrades.
    News

    Old pilot boat gets a new turn of speed

    2010-07-01T12:00:00Z

    A number of companies collaborated to get the best out of an old Falmouth pilot boat with a lot of history. A recent refit included a complete renovation of the engine room, electrics, exhaust and steering systems.

  • Pressure streamlines show as computer generated images.
    News

    Propeller partnership pursues improved propulsion

    2010-06-25T11:56:00Z

    A long term partnership between a propeller manufacturer and a leading university is bringing science to bear on the interaction between hull design, propellers and other hull appendages.

  • Divers Down’s Swanage Diver is now powered by a pair of the recently launched Perkins Marine Power M300C engines.
    News

    Repowered dive boat a breath of fresh air

    2010-06-21T17:09:00Z

    Appropriately named Divers Down, believed to be the UK’s oldest dive school and one of the south coast’s most respected dive charter and escorted dive operators, has repowered one of its boats.

  • Propeller production at Drunen in the Netherlands will finish this year. Photo courtesy of Wärtsilä.
    News

    Wärtsilä announces end of Dutch production this year

    2010-06-10T11:10:00Z

    Finnish marine power systems manufacturer Wärtsilä announced on Tuesday that it will start the execution of restructuring measures in the Netherlands following positive advice from the works council and approval of a social plan.

  • The new company is now able to supply complete marine transmission systems.
    News

    Seawork debut for merged marine transmission specialist

    2010-05-25T20:44:00Z

    Two Coventry based transmission specialists, NDE Clarke Transmissions and Pitchline Transmissions, have formally merged their operations, creating a highly focused specialist mechanical power transmission company which specialises in universal drive shafts and flexible gear type couplings for the marine industries.

  • The sculptural ‘Medusa’ is actually a modified Garrett GT42 turbocharger.
    News

    Hot stuff stays where it’s needed at Seawork

    2010-05-25T20:19:00Z

    The intertwining exhaust pipes of the Medusa-like modified Garrett GT42 turbocharger that will be on Turbo Dynamics’ Seawork stand make a point beyond the purely sculptural.

  • As part of the design process, Kort offers detailed estimates of vessel performance.
    News

    Seawork exhibitor courts the emerging Indian market

    2010-05-25T18:30:00Z

    Kent UK based Seawork exhibitor Kort Propulsion Co Ltd has again demonstrated its global reach by completing an order from an Indian shipyard on behalf of the Inland Indian Waterways Authority (IWAI).

  • The new UltraJet UJ 525 provides a high performance solution where size and cost constraints have previously made it difficult to provide an optimised waterjet package.
    News

    See the ultimate UltraJet alongside at Seawork

    2010-05-25T17:38:00Z

    Visitors to Seawork 2010 will find propulsion specialists Ultra Dynamics Ltd on Stand 1 inside the exhibition hall and an 18m South Boats wind farm support vessel equipped the new UltraJet UJ525 drives units outside on the Seawork pontoon.